Material: Antique Cypress Customer request: Antique barn doors for new home. One door to incorporate a century old sign. Machined with a MultiCam CNC router.

Material: Antique Cypress Customer request: Antique barn doors for new home. One door to incorporate a century old sign. Machined with a MultiCam CNC router.
We produced these glass frame doors featuring a unique grid system on our MultiCam 5000. The doors were made from 3/4″ MDF.
We made these unique barn doors for Quaker Steak & Lube. The unit consisted of (2) 54″ wide x 96″ tall doors with an 18″ x 80″ double action hinged door. The doors slide on an overhead track for total access…when closed, the smaller doors allow access.
Made from 1-1/4″ Extira. Machined on our MultiCam 5000.
These unique gable brackets were made for Louisiana Spirits Rummery. The gable brackets were used in the restoration of a 100 year old dwelling converted to a gift shop. The brackets were replicated from a picture of the original building. The brackets measured 98″ in width-38″ in height and...
A friend of mine, Glen Daigle (owner of Rabideaux’s Sausage Kitchen), restored an antique Coca Cola dispenser for use as a mixing bar. Glen asked us to make a bar top from cypress. We used 6/4 cypress for this project which included the top, two scalloped sides and a...
Our customer has requested 22 porch brackets that will attach to the exterior post on their Acadian style home. These scrolled porch brackets are machined from 5/8” Extira with a Spanish cedar frame. The brackets measure 16” x 12” x 1-1/2”. The address sign will compliment the porch brackets....
Several of our customers have requested door units made from old wood. The sinker pine exterior door unit measures 96” x 72”. The antique pine ward robe door units measure 32” & 30” x 96”.
Our customer has requested a custom headboard for a King sized bed. The design incorporates a series if sweeping curves and will be cut from ¾” birch plywood. The piece measures 76” x 60” x 1-1/2”…We laminated two sheets of plywood to get our thickness. The customer will have...
Customer Request: Compound curve canopy to enhance area above fireplace. Software: EnRoute Cad/Cam Machinery: MultiCam 5000 CNC overhead router The canopy measures 86-5/8” at the base and tapers to a width of 74-7/8” at the top. The height is 16” with a 5-7/8” offset to the front & sides...