Today was the day for putting the gates together! We dry fitted our components to verify our measurements & began the process of assembling the gates. The first picture shows the insertion of 4” x ½” dcwel rods into holes we drilled in the mortise channel of the stiles....
THE GATE PROJECT
A customer has requested our assistance in constructing new gates for 3 courtyard openings. The project will consist of 1 opening that is 6 feet wide by 8 feet tall and 2 openings that are 4 feet wide by 7 feet tall. Each opening will consist of a paired...
CYPRESS BATTEN SHUTTER
We made this Cypress Batten Shutter to be used at a customers camp. The project measured 35 1/2 “ wide x 39 ½” tall. We glued up a panel 44” x 38 ½” allowing us to machine the project as 1 piece. The mortise & tenon joints coupled with...
KIDS TABLE & CHAIRS
Here is a neat project a customer asked us to create. The table & chairs were for a grandchild’s birthday. First we created the file in our Cad program and exported to our CNC machine… Our next step was to cut out the components on our MultiCam CNC Router....