Arched Room divider restoration!

Multi- Cam

We are helping homeowners to put things together after the hurricanes hit Lake Charles. One customer was told by a contractor they would have to “square off” their arched room […]

Read More

FLEUR DE LIS KEY

Carvings, Multi- Cam, Wood

A customer has requested 2 Fleur de lis keys to made from Extira for placement above his garage door openings. The pieces will be center of the overhead door and […]

Read More

CHILD’S ROCKING CHAIR

Multi- Cam, Wood

I decided to make my little granddaughter a rocking chair. She is a mess…at the ripe old age of 1…she is climbing and into everything. I thought if I made […]

Read More

ALLIGATOR TEXTURED GUITAR

Multi- Cam, Uncategorized, Wood

Project produced with EnRoute Pro and CNC router by MultiCam. This is a project we did a while back; I think you will find it interesting. One of our customers […]

Read More

DE-NAILED PINE CORBELS

Carvings, Multi- Cam, Uncategorized, Wood

We made corbels today…these will provide support for the mantle in our earlier project. The dimensions for the 2 corbels are… 10 ¾” tall, 5 ½” wide with a depth […]

Read More

DE-NAILED MANTLE

Multi- Cam, Uncategorized, Wood

A customer requested we mill a de-nailed pine beam for use as a rustic fireplace mantle. The beam measurements were…length 108”, width 12” and a thickness of 6 ½”. The […]

Read More

GATE PROJECT FINAL

Multi- Cam, Uncategorized, Wood

We finished our gate project today. After removing the clamps, we ran the pieces through our sander. This removed the glue residue and evened up any height differences at the […]

Read More

THE CRUCIFIX

Carvings, Multi- Cam, Wood

Carvings are one of my favorite things to do. I have carved many scenes with my MultiCam CNC router but none as interesting as the two Crucifix projects we are […]

Read More

ELLIPTICAL ARCH FRAME

Multi- Cam, Wood

A customer has requested that we supply framing for (2) 36” elliptical arches with a 9” rise. The frames will be installed in 36” openings and sheetrock will be applied […]

Read More

THE GATE PROJECT…PART TWO

Multi- Cam, Wood

Today was the day for putting the gates together! We dry fitted our components to verify our measurements & began the process of assembling the gates. The first picture shows […]

Read More

THE GATE PROJECT

Multi- Cam, Wood

A customer has requested our assistance in constructing new gates for 3 courtyard openings. The project will consist of 1 opening that is 6 feet wide by 8 feet tall […]

Read More

CYPRESS BATTEN SHUTTER

Multi- Cam, Wood

We made this Cypress Batten Shutter to be used at a customers camp. The project measured 35 1/2 “ wide x 39 ½” tall. We glued up a panel 44” […]

Read More