I decided to make my little granddaughter a rocking chair. She is a mess…at the ripe old age of 1…she is climbing and into everything. I thought if I made her a rocking chair, she might actually sit still for a minute!! The first picture is the cad file....
En route
ALLIGATOR TEXTURED GUITAR
Project produced with EnRoute Pro and CNC router by MultiCam. This is a project we did a while back; I think you will find it interesting. One of our customers has an alligator products business. This customer is also a musician with friends in the music industry. We were...
DE-NAILED PINE CORBELS
We made corbels today…these will provide support for the mantle in our earlier project. The dimensions for the 2 corbels are… 10 ¾” tall, 5 ½” wide with a depth of 8 ½”. The body of the corbels consist of 4 pieces…the 2 center pieces are 2” thick &...
DE-NAILED MANTLE
A customer requested we mill a de-nailed pine beam for use as a rustic fireplace mantle. The beam measurements were…length 108”, width 12” and a thickness of 6 ½”. The finished mantel would be…length 66”, width 11” and a thickness of 5 ¼”. We spent several hours removing...
GATE PROJECT FINAL
We finished our gate project today. After removing the clamps, we ran the pieces through our sander. This removed the glue residue and evened up any height differences at the joints. The next step involved cutting the arc for the outside radius doors. Since all the gates were pairs,...
THE CRUCIFIX
Carvings are one of my favorite things to do. I have carved many scenes with my MultiCam CNC router but none as interesting as the two Crucifix projects we are about to undertake. One customer has requested a life size Crucifix to be carved from reclaimed pine. The piece...
ELLIPTICAL ARCH FRAME
A customer has requested that we supply framing for (2) 36” elliptical arches with a 9” rise. The frames will be installed in 36” openings and sheetrock will be applied for the jamb. The precision of our MultiCam 5000 will provide a true arch for the sheetrock to follow....
THE GATE PROJECT…PART TWO
Today was the day for putting the gates together! We dry fitted our components to verify our measurements & began the process of assembling the gates. The first picture shows the insertion of 4” x ½” dcwel rods into holes we drilled in the mortise channel of the stiles....
THE GATE PROJECT
A customer has requested our assistance in constructing new gates for 3 courtyard openings. The project will consist of 1 opening that is 6 feet wide by 8 feet tall and 2 openings that are 4 feet wide by 7 feet tall. Each opening will consist of a paired...